| Abstract: | Magnetorheological elastomer (MRE) specimens were prepared to find the optimum compressive characteristics using different types and amounts of iron powder. A magnetic field of up to 2 T was applied during vulcanization. Among the four types of iron powders, the specimen with round‐shaped carbonyl iron powder and small grain size shows higher magnetic effects than that with bigger and irregularly shaped electrolyte iron powder. However, the compressive modulus of the rubber with electrolyte iron powder is higher without magnetic treatment at a given amount. In general, the bigger and irregularly shaped iron particles tend to move slowly and produce nonuniform distribution when a magnetic field is applied. The experimental results show that the mechanical properties are better when applying a magnetic field of 1.5 T compared with 2.0 T during the specimen vulcanization. Applying a magnetic field of 300 mT during the compression test enhanced the compressive modulus by 12% to 15%. The rate of increase of the modulus decreased exponentially with prestrain. |
