Interfacial oil droplets

Very small, discrete oil droplets can form at the solid-liquid interface. We demonstrate this effect through formation of decane droplets at the interface between an aqueous ethanol solution and silicon wafers that have been made hydrophobic through self-assembly of octadecyltrichlorosilane (OTS). The droplets have a lens-like shape; the shape is approximately a spherical cap with a contact angle < 25 degrees. The heights of the droplets are about 2-50 nm, and diameters at the three-phase boundary are about 100-600 nm in 25% ethanol solution. The size and contact angle can be varied by changing the ethanol concentration. The contact angle of the very small droplets (height < 20 nm) is similar to the contact angle of macroscopic droplets (height approximately equal to 1 mm), so the line tension is very small. The droplets are only stable for a few hours: they gradually lose mass, presumably through Ostwald ripening. The drop perimeter is not pinned during ripening but retreats across the solid. We form the droplets by direct adsorption from an emulsion; evidence for adsorption is obtained by comparing the drop volumes in bulk to the volumes at the interface. The droplet sizes are obtained by dynamic light scattering and atomic force microscopy.