| 8mm基波回旋行波管放大器的设计 |
| |
| 引用本文： | 贾云峰,来国军,刘濮鲲.8mm基波回旋行波管放大器的设计[J].强激光与粒子束,2005,17(8):1167-1170. |
| |
| 作者姓名： | 贾云峰 来国军 刘濮鲲 |
| |
| 作者单位： | 中国科学院 电子学研究所，北京 100080 |
| |
| 基金项目： | 国家杰出青年科学基金资助课题（60125104） |
| |
| 摘 要： | 对8 mm基波回旋行波管放大器进行了研究。通过稳定性分析,选定了放大器的工作参数。利用PIC粒子模拟程序对放大器中的电子注-波互作用过程进行了详细的分析和讨论,获得了回旋行波管稳定工作的物理图像,完成了8 mm基波回旋行波管放大器高频系统的初步设计。模拟结果表明,在优化设计条件下,放大器可以获得大于450 kW的输出功率5、0 dB增益、22.5%的效率和大约5%的3 dB带宽。
|
| 关 键 词： | 回旋行波管 基次谐波 PIC模拟 |
| 文章编号： | 1001-4322(2005)08-1167-04 |
| 收稿时间： | 2005-04-14 |
| 修稿时间： | 2005-05-23 |
Primary design of an 8 mm fundamental wave gyro traveling wave tube amplifier |
| |
| JIA Yun-feng,LAI Guo-jun,LIU Pu-kun.Primary design of an 8 mm fundamental wave gyro traveling wave tube amplifier[J].High Power Laser and Particle Beams,2005,17(8):1167-1170. |
| |
| Authors: | JIA Yun-feng LAI Guo-jun LIU Pu-kun |
| |
| Institution: | Institute of Electronics, Chinese Academy of Sciences, P.O.Box 2652, Beijing 100080, China |
| |
| Abstract: | An 8 mm fundamental wave gyro traveling wave tube is studied. By the analysis of stability, the parameters are determined. Employing a PIC code, the interaction between electron beam and wave is simulated and discussed in detail, and the primary design is presented. The results indicate that an over 450 kW output power and 50 dB gain are obtained from amplifier under the optimum condition. The efficiency exceeds 22.5% and the 3 dB bandwidth is about 5%. |
| |
| Keywords: | Gyro traveling wave tube Fundamental wave PIC simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
