| 碳钢表面渗硼和激光热处理改性层的磨粒磨损性能和机理研究 |
| |
| 引用本文： | 胡金锁,郝敬敏,等.碳钢表面渗硼和激光热处理改性层的磨粒磨损性能和机理研究[J].摩擦学学报,2002,22(2):150-152. |
| |
| 作者姓名： | 胡金锁 郝敬敏 |
| |
| 作者单位： | 1. 军械工程学院,弹药工程系,河北,石家庄,050003
2. 河北电大,网络资源室,河北,石家庄,050071 |
| |
| 摘 要： | 采用固体渗硼与激光热处理复合工艺对 4 5 #钢试样进行表面改性 ,在 4 5 #钢表面得到完整的硼共晶层 ,采用扫描电子显微镜观察分析表面改性处理后的 4 5 #钢试样同 GCr15钢对摩时的磨损表面形貌 ,并考察了其磨损机理 .结果表明 ,经表面渗硼和激光热处理后 ,4 5 #钢表层形成共晶化组织 ,相应的硼共晶表面改性层具有适当的硬度和韧性 ,因而其抗磨粒磨损性能明显改善 ;表面改性处理后的 4 5 #钢试样同 GCr15钢对摩时呈现断裂磨损特征
|
| 关 键 词： | 45#钢 渗硼 激光表面处理 磨损机理 |
| 文章编号： | 1004-0595(2002)02-0150-03 |
| 修稿时间： | 2001年7月24日 |
Research on Abrasive Wear Resistance and Mechanism of Boronized Layer Being Eutecticumed with Laser |
| |
| HU Jin suo,HAO Jing min,LI Zhi yuan,WANG Ying.Research on Abrasive Wear Resistance and Mechanism of Boronized Layer Being Eutecticumed with Laser[J].Tribology,2002,22(2):150-152. |
| |
| Authors: | HU Jin suo HAO Jing min LI Zhi yuan WANG Ying |
| |
| Abstract: | Solid boronizing and laser surface treatment is applied to AISI 1045 steel to obtain the boron eutectic layer of proper microhardness and toughness. The wear behavior of the surface modified AISI 1045 steel specimen sliding against SAE 52100 steel in the presence of SiO 2 abrasives was examined with an MM 200 friction and wear tester. The morphologies of the worn surfaces were observed with a scanning electron microscope. The wear resistance of the boron permeated steel specimen is bettered after laser heat treatment. The surface modified layer is characterized by micro cracking and fracture in sliding against SAE 52100 steel in the presence of SiO 2 abrasives. |
| |
| Keywords: | mild steel boron permeation laser surface treatment wear mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《摩擦学学报》浏览原始摘要信息 |
| 点击此处可从《摩擦学学报》下载免费的PDF全文 |
|
