首页 | 本学科首页   官方微博 | 高级检索  
     

TA15钛合金激光沉积温度场数值模拟与检测
引用本文:杨光, 丁林林, 钦兰云, 等. TA15钛合金激光沉积温度场数值模拟与检测[J]. 强激光与粒子束, 2014, 26: 119002. doi: 10.11884/HPLPB201426.119002
作者姓名:杨光  丁林林  钦兰云  卞宏友  王维
作者单位:1.沈阳航空航天大学 航空制造工艺数字化国防重点学科实验室, 沈阳 1 1 01 36
基金项目:国家自然科学基金项目,国防基础科研项目,航空基金项目
摘    要:在综合考虑热源模型、对流辐射换热、相变潜热、材料非线性因素对激光沉积修复温度场影响前提下,建立了激光沉积修复的数学模型,采用有限元参数化设计语言(APDL)对多道多层激光沉积修复温度场进行了数值模拟。研究了激光沉积修复瞬时温度场及其中心高度上节点温度随时间变化情况,分析了修复件中心高度上温度梯度分布情况。搭建了激光沉积修复温度测量系统,对修复时表面温度进行了测量,并与模拟温度进行了比较,两者吻合较好。为控制激光沉积修复组织、提高修复质量提供有效手段。

关 键 词:温度场   激光沉积修复   数值模拟   钛合金
收稿时间:2014-05-13
修稿时间:2014-09-11

Measurement and numerical simulation of temperature field of laser deposition of TA15 titanium alloy
Yang Guang, Ding Linlin, Qin Lanyun, et al. Measurement and numerical simulation of temperature field of laser deposition of TA15 titanium alloy[J]. High Power Laser and Particle Beams, 2014, 26: 119002. doi: 10.11884/HPLPB201426.119002
Authors:Yang Guang  Ding Linlin  Qin Lanyun  Bian Hongyou  Wang Wei
Affiliation:1. Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University,Shenyang 110136,China
Abstract:The finite element model is built for laser deposition repair process based on comprehensive consideration of the heat source model, heat transfer of convection and radiation, phase change latent heat and nonlinear factors of material. Then a numerical simulation of temperature field of multi-pass and multi-layer laser deposition repair is conducted using ANSYS parametric design language. The distribution of transient temperature field are studied at different time, and change of temperature and the distribution of temperature gradient of different nodes along center height of the repaired parts are analyzed. A temperature measurement system of laser deposition repair is established to test surface temperature of the repaired parts, and a good agreement is observed between the calculated temperature and the experimental results. It is found that thermal simulation of laser deposition repair is an effective way to control the microstructure of laser deposition repaired parts and improve the quality of repair.
Keywords:temperature field  laser deposition repair  numerical simulation  titanium alloy
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号