| Nd:YAG激光+脉冲MAG电弧复合热源焊接规范参数对焊缝表面成形的影响 |
| |
| 引用本文： | 秦国梁,雷振,王旭友,王威,林尚扬.Nd:YAG激光+脉冲MAG电弧复合热源焊接规范参数对焊缝表面成形的影响[J].应用激光,2006,26(2):97-100. |
| |
| 作者姓名： | 秦国梁 雷振 王旭友 王威 林尚扬 |
| |
| 作者单位： | 1. 机械科学研究院哈尔滨焊接研究所,哈尔滨,150080;哈尔滨工业大学,材料科学与工程学院,150001
2. 机械科学研究院哈尔滨焊接研究所,哈尔滨,150080 |
| |
| 摘 要： | 利用余高-熔宽比表示焊缝表面铺展性并与焊缝余高一起作为参数来评价激光+电弧复合热源焊缝的表面成形,通过试验研究了Nd:YAG激光+脉冲MAG电弧复合热源焊接过程中焊接规范参数对复合热源焊缝表面成形的影响,并分析了激光对复合热源焊缝表面成形的影响。研究结果表明,在电弧功率变化过程中,激光对复合热源焊缝表面成形影响较小,但随着激光功率的增大,其对焊缝表面成形的影响也逐渐增大。焊接速度变化过程中,激光束能量的加入不仅改善焊缝表面成形还极大地提高了焊接速度,而在光丝间距和离焦量变化过程中,激光束对复合热源焊缝表面成形的影响很小。
|
| 关 键 词： | 激光 复合热源焊接 激光焊 脉冲MAG焊 焊缝成形 |
| 收稿时间： | 2005/11/27 |
| 修稿时间： | 2005年11月27 |
Influences of Nd:YAG Laser + Pulsed MAG Arc Hybrid Welding Parameters on Its Weld Appearance |
| |
| Qin Guoliang,Lei Zhen,Wang Xuyou,Wang Wei,Lin Shangyang.Influences of Nd:YAG Laser + Pulsed MAG Arc Hybrid Welding Parameters on Its Weld Appearance[J].Applied Laser,2006,26(2):97-100. |
| |
| Authors: | Qin Guoliang Lei Zhen Wang Xuyou Wang Wei Lin Shangyang |
| |
| Abstract: | The reinforcement-to-width ratio,which was used to indicate the weld metal spreadability,and reinforcement were used to elevate weld appearance in Nd:YAG laser + pulsed MAG(Metal Active Gas) arc hybrid welding.The influences of hybrid welding parameters on hybrid weld appearance were studied by experiments.The studied results indicated that laser has a few influence on hybrid weld appearance in variation of arc power,while its influence will be strengthened with increasing of laser power.The addition of Nd:YAG laser into pulsed MAG welding not only improves the hybrid weld appearance,but also greatly increases welding speed.The influence of Nd:YAG laser on hybrid weld appearance is little in variations of laser-arc distance and defocusing distance. |
| |
| Keywords: | Laser hybrid welding laser welding pulsed MAG welding weld appearance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
