首页 | 本学科首页   官方微博 | 高级检索  
     检索      

用BOXCARS技术诊断含铝固体燃剂燃烧场
引用本文:张振荣,刘晶儒,黄梅生,胡志云,关小伟.用BOXCARS技术诊断含铝固体燃剂燃烧场[J].光学技术,2004,30(5):544-546.
作者姓名:张振荣  刘晶儒  黄梅生  胡志云  关小伟
作者单位:西北核技术研究所,西安,710024;西北核技术研究所,西安,710024;西北核技术研究所,西安,710024;西北核技术研究所,西安,710024;西北核技术研究所,西安,710024
基金项目:国家高技术研究发展专项经费资助
摘    要:介绍了用单脉冲BOXCARS技术测量含铝固体燃剂燃烧场的温度及氮气的浓度。分析了激光光束质量对CARS信号强度的影响,给出了在燃烧场中取得的单脉冲CARS光谱,并进行了理论拟合,得到了燃烧场的温度及组份浓度数据。在燃烧场中心高5mm处温度值约为2550K,氮气浓度平均为25.5%。测量了燃烧场中不同高度处CARS光谱,给出了燃烧场温度、氮气浓度随高度变化的曲线,对结果进行了分析。

关 键 词:BOXCARS  温度  浓度  燃烧场  固体燃剂
文章编号:1002-1582(2004)05-0544-03
修稿时间:2003年10月20

BOXCARS diagnostics for aluminiferous solid fuel combustion
ZHANG Zhen-rong,LIU Jing-ru,HUANG Mei-sheng,HU Zhi-yun,GUAN Xiao-wei.BOXCARS diagnostics for aluminiferous solid fuel combustion[J].Optical Technique,2004,30(5):544-546.
Authors:ZHANG Zhen-rong  LIU Jing-ru  HUANG Mei-sheng  HU Zhi-yun  GUAN Xiao-wei
Abstract:The temperature and concentration distribution in the aluminiferous solid fuel combustion are measured by BOXCARS with single laser pulse. The data are acquired at high temporal and spatial resolution. Results indicate that temperature is as high as 2550K at 5mm height above fuel surface and concentration of N2 is about 25.5% in the combustion. Connection of CARS signal intensity and laser beam quality is analyzed. The laser beam is optimized for enhance the signal intensity.
Keywords:BOXCARS  temperature  concentration  combustion  solid fuel
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号