首页 | 本学科首页   官方微博 | 高级检索  
     检索      

分段弹侵彻效率的数值模拟研究
引用本文:邓云飞,张伟,曹宗胜,陈勇.分段弹侵彻效率的数值模拟研究[J].高压物理学报,2011,25(3).
作者姓名:邓云飞  张伟  曹宗胜  陈勇
作者单位:哈尔滨工业大学空间碎片高速撞击研究中心;
摘    要: 采用ANSYS-AUTODYN数值模拟软件针对撞击速度在1 500~3 500 m/s内的平头分段杆侵彻效应进行研究,分析分段杆的侵彻效率和弹坑形状与分段杆的连接结构、间隔和撞击速度等参数的关系。结果表明,在一定的条件下,分段杆的侵彻效率比连续杆更优越。通过对公开报道的实验工况进行数值模拟,验证了数值模拟结果的有效性,对分段杆的侵彻机理研究及工程结构设计具有指导意义。

关 键 词:分段杆  弹体  侵彻  ANSYS-AUTODYN  数值模拟
收稿时间:2010-03-03;

Numerical Investigation of Penetration Performance of Segmented Rods Penetration into Steel Target
DENG Yun-Fei,ZHANG Wei,CAO Zong-Sheng,CHEN Yong.Numerical Investigation of Penetration Performance of Segmented Rods Penetration into Steel Target[J].Chinese Journal of High Pressure Physics,2011,25(3).
Authors:DENG Yun-Fei  ZHANG Wei  CAO Zong-Sheng  CHEN Yong
Institution:DENG Yun-Fei,ZHANG Wei,CAO Zong-Sheng,CHEN Yong(Hypervelocity Impact Research Center,Harbin Institute of Technology,Harbin 150080,China)
Abstract:The penetration performance of blunt segmented rods was studied with numerical simulations by using hydro code ANASYS-AUTODYN systematically,and the dependence of penetration performance on the connect configuration,shape,spacing distance,impact velocity of segmented rods was also investigated.The numerical results indicated that penetration performance of the segmented rods is significantly greater than the parent continuous rods under some conditions.Simulations on the tests from open literature validate ...
Keywords:segmented rods  projectile  penetration  ANSYS-AUTODY  numerical simulation  
本文献已被 CNKI 等数据库收录!
点击此处可从《高压物理学报》浏览原始摘要信息
点击此处可从《高压物理学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号