首页 | 本学科首页   官方微博 | 高级检索  
     检索      

掺杂光子晶体光纤产生光孤子所需泵浦功率的研究
引用本文:朱方玺,郑义.掺杂光子晶体光纤产生光孤子所需泵浦功率的研究[J].发光学报,2014,35(4):496-500.
作者姓名:朱方玺  郑义
作者单位:北京交通大学 理学院, 北京 100044
基金项目:国家“973”计划(2010CB327604)资助项目
摘    要:在光纤纤芯中掺入适量GeO2有利于增加纤芯非线性折射率,提高光纤的非线性系数。利用有限元法设计了一种带宽为1.45 μm的宽反常色散掺杂光子晶体光纤,其光纤可以利用低泵浦功率产生任意波长的光孤子。分析结果显示,当脉冲脉宽TFWHM取300 fs时,产生基阶光孤子需要的最高平均泵浦功率为0.001 695 W,而产生五阶光孤子需要的最高平均泵浦功率仅0.042 38 W。

关 键 词:非线性光学  光孤子  有限元法  任意波长  低泵浦功率
收稿时间:2013/11/13

Theoretical Study of Pump Power Used to Obtain Optical Solitons in Doped Photonic Crystal Fiber
ZHU Fang-xi,ZHENG Yi.Theoretical Study of Pump Power Used to Obtain Optical Solitons in Doped Photonic Crystal Fiber[J].Chinese Journal of Luminescence,2014,35(4):496-500.
Authors:ZHU Fang-xi  ZHENG Yi
Institution:School of Science, Beijing Jiaotong University, Beijing 100044, China
Abstract:The nonlinear refractive index and nonlinear coefficient of the fiber can be enhanced by doping GeO2 into the fiber core. A special photonic crystal fiber for generating optical solitons is designed via the finite element method. Its bandwidth is 1.45 μm around the anomalous dispersion regime. The optical solitons with any wavelength can be generated easily in this fiber at low pump power. The numerical results show that the highest average pump power used to obtain the fundamental soliton is 0.001 695 W when the pump pulse width TFWHM is 300 fs, and it is only 0.042 38 W used to obtain the fifth-order solitons.
Keywords:nonlinear optics  optics soliton  finite element method  various wavelength  low pump power
本文献已被 CNKI 等数据库收录!
点击此处可从《发光学报》浏览原始摘要信息
点击此处可从《发光学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号