| 低频振动切削过程的理论研究 |
| |
| 引用本文： | 马晓君,左景涛,张则.低频振动切削过程的理论研究[J].佳木斯大学学报,2005,23(3):468-472,504. |
| |
| 作者姓名： | 马晓君 左景涛 张则 |
| |
| 作者单位： | [1]内蒙古工业大学机构学院,内蒙古自治区呼和浩特市010062 [2]哈尔滨轴承股份有限公司轴承研究所,黑龙江哈尔滨150036 [3]佳木斯大学,黑龙江佳木斯154007 |
| |
| 基金项目： | 黑龙江省自然科学基金资助项目. |
| |
| 摘 要： | 对振动切削和普通切削的运动过程进行了理论研究，其中包括受力分析和运动分析，并且建立了相应的数学模型，同时基于Merritt等人所建立的普通切削系统的闭环模型，合理的建立了低频振动切削系统的闭环模型，并且比较了振动切削与普通切削机理之问的差异，为振动切削机理的完善奠定了基础。
|
| 关 键 词： | 振动切削 普通切削 闭环模型 |
| 文章编号： | 1008-1402（2005）03-0468-05 |
| 收稿时间： | 2005-04-04 |
| 修稿时间： | 2005-04-04 |
Research On Low Frequency Vibration Cutting Process |
| |
| MA Xiao-jun,ZUO Jing-tao,ZHANG Ze.Research On Low Frequency Vibration Cutting Process[J].Journal of Jiamusi University(Natural Science Edition),2005,23(3):468-472,504. |
| |
| Authors: | MA Xiao-jun ZUO Jing-tao ZHANG Ze |
| |
| Institution: | 1.Mechanical college,Inner Mongolia University of Technology,Huhehote 010062,China;2.Institute of Bearing,Harbin bearing Co.Ltd.,Harbin 150036,China;3.Jiamusi University,Jiamusi 154007,China |
| |
| Abstract: | Moving process of vibration cutting and conventional cutting has been studied in this article. Analysis of the forces acting and the motion .has been studied, and its mathematical model is established. Based on closed loop model of conventional cutting system that had been established by Merfitt et al, reasonable closed loop model of low frequency vibration cutting system is established. The difference of vibration cutting mechanism and conventional cutting mechanism has been studied. This model offers the basis of improving the vibration.cutting mechanism. |
| |
| Keywords: | vibration cutting conventional cutting closed loop model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
