Detection of defects in cylindrical structures using a time reverse method and a finite-difference approach

The detection and characterization of defects in structures is an important issue in non-destructive testing. To avoid the scanning of large samples, guided elastic waves, which propagate along the structure, are excited. These waves interact with a defect, which results in a scattered wave field. In an experiment, the displacements of these scattered waves are recorded over time for a fixed axial coordinate at a number of circumferential positions of a circular cylindrical tube. Since in complex structures it is difficult to determine the axial and particularly circumferential position of the defect directly from the time signals, a time reversed numerical simulation is performed. There the measured displacement histories are reversed in time and used as displacement excitations in a simulation of the tested structure. A three-dimensional code in cylindrical coordinates, based on a velocity-stress finite-difference method, is used to simulate the wave propagation. As long as the geometric and material parameters are chosen equivalent to the performed experiment, the scattered waves travel back through the simulated structure and interfere, even if no defect is present in the numerical model. The result is an increase of the amplitudes of the stress and displacement components at the location where the defect was in the tested sample.