Evaluation and application of Diffusive Gradients in Thin Films (DGT) technique using Chelex-100, Metsorb™ and Diphonix binding phases in uranium mining environments

A new resin- Diphonix^® in Diffusive Gradients in Thin Films (DGT) technique for the determination of uranium was investigated and compared with previously used binding phases for uranium, Chelex^®-100 and Metsorb™. The DGT gel preparation and the elution procedure were optimized for the new resin. The U uptake on Diphonix^® resin gel was 97.4 ± 1.5% (batch method; U] = 20 μg L⁻¹; 0.01 M NaNO₃; pH = 7.0 ± 0.2). The optimal eluent was found to be 1 M 1-hydroxyethane-1, 1-diphosphonic acid (HEDPA) with an elution efficiency of 80 ± 4.2%. Laboratory DGT study on U accumulation using a DGT samplers with Diphonix^® resin showed a very good performance across a wide range of pH (3–9) and ionic strength (0.001–0.7 M NaNO₃). Diffusion coefficients of uranium at different pH were determined using both, a diffusion cell and the DGT time-series, demonstrating the necessity of the implementation of the effective diffusion coefficients into U-DGT calculations. Diphonix^® resin gel exhibits greater U capacity than Chelex^®-100 and Metsorb™ binding phase gels (a Diphonix^® gel disc is not saturated, even with loading of 10.5 μmol U). Possible interferences with Ca²⁺ (up to 1.33 × 10⁻² M), PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$ (up to 1.72 × 10⁻⁴ M), SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$ (up to 4.44 × 10⁻³ M) and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ (up to 8.20 × 10⁻³ M) on U-DGT uptake (U] = 20 μg L⁻¹) were investigated. No effect or minor effect of Ca²⁺, PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$, SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$, and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ on the quantitative measurement of U by Diphonix^®-DGT was observed. The results of this study demonstrated the DGT technique with Diphonix^® resin is a reliable and robust method for the measurement of labile uranium species under laboratory conditions.