Flow visualization of supersonic laminar flow over a backward-facing step via NPLS

An experimental study on a supersonic laminar flow over a backward-facing step of 5 mm height was undertaken in a low-noise indraft wind tunnel. To investigate the fine structures of Ma = 3.0 and 3.8 laminar flow over a backward-facing step, nanotracer planar laser scattering was adopted for flow visualization. Flow structures, including supersonic laminar boundary layer, separation, reattachment, redeveloping turbulent boundary layer, expansion wave fan and reattachment shock, were revealed in the transient flow fields. In the Ma = 3.0 BFS (backward-facing step) flow, by measuring four typical regions, it could be found that the emergence of weak shock waves was related to the K–H (Kelvin–Helmholtz) vortex which appeared in the free shear layer and that the convergence of these waves into a reattachment shock was distinct. Based on large numbers of measurements, the structure of time-averaging flow field could be gained. Reattachment occurred at the location downstream from the step, about 7–7.5 h distance. After reattachment, the recovery boundary layer developed into turbulence quickly and its thickness increased at an angle of 4.6°. At the location of X = 14h, the redeveloping boundary layer was about ten times thicker than its original thickness, but it still had not changed into fully developed turbulence. However, in the Ma = 3.8 flow, the emergence of weak shock waves could be seen seldom, due to the decrease of expansion. The reattachment point was thought to be near X = 15h according to the averaging result. The reattachment shock was not legible, which meant the expansion and compression effects were not intensive.