Application of a double-focusing magnetic sector inductively coupled plasma mass spectrometer with laser ablation for the bulk analysis of rare earth elements in rocks fused with Li2B4O7

Results of the use of a double-focusing, magnetic sector inductively coupled plasma mass spectrometer (ICP-MS) with ultraviolet (UV) laser ablation (LA) are presented for the bulk analysis of rare earth elements (REEs) in rocks fused with Li₂B₄O₇. The sample preparation procedure used a sample to flux weight ratio of 1 : 7, and was identical with a procedure routinely used for X-ray fluorescence (XRF) analyses of major and minor elements in geological materials. Calibration was based on a total of 18 international standard reference materials (SRMs), and Ba was used as an internal standard element for all REEs. The calibration curves were constructed using a weighted regression model. The use of internal standard, without exception, improved the correlation coefficients significantly. The 3σ detection limits were established by a blank sample of SiO₂ spiked with Ba, and were in the range from 0.003 μg g^–1 (¹⁵⁹Tb) to 0.051 μg g^–1 (¹⁴⁰Ce). The use of a large set of SRMs for calibration gave a good basis for the evaluation of analytical quality, and extensive data for calculated analytical uncertainty are presented. Instrumental precision and the repeatability of the method were studied separately, and no significant difference in these two sets of parameters were found, indicating that the spread of results predominantly was connected to the instrumental measurements. Repeated ablations on the surface of a disk did not influence subsequent measurements with XRF, showing that the fused disks can be stored for future use in XRF and/or LA-ICP-MS analysis. Received: 12 February 1998 / Revised: 6 April 1998 / Accepted: 17 April 1998