| Abstract: | Our laboratory previously reported the observation of a high temperature, melt rheological transition in a styrene–butadiene–styrene (S:7 × 103 and B:43 × 103) block copolymer from the highly elastic, nonlinear viscous behavior typical of a multiphase structure to linear viscous behavior with insignificant elasticity typical of a single-phase structure. We have investigated the precise nature of this melt rheological transition in the 7S-43B-7S sample by measuring the dynamic viscoelastic properties at more than 11 temperatures, including several in the transition region. A new procedure was developed for accurately measuring the sample temperature in a Weissenberg rheogoniometer. The transition is found to start at about 140°C and proceed over a narrow transition region from 140 to about 150°C. Data at all temperatures superimpose onto a single master curve only at high reduced frequencies. At low reduced frequencies, two characteristic branches of the master curve are formed. The data at temperatures below the transition region superimpose onto the upper branch where the dynamic viscosity η′(ω) is a strong function of ω, whereas the data at temperatures above the transition region superimpose onto the lower branch where η′(ω) is independent of ω. The data at temperatures within the transition region fall between the upper and lower branches, ordered according to their temperature positions. The apparent flow activation energy is found to be constant at about 22.8 kcal/mole below the transition region, but appears to decrease to about 17.4 kcal/mole above the transition region. The narrowness of the rheological transition far above the glass transition temperature of the polystyrene domains and the limiting linear viscoelastic behavior at low frequencies above the transition suggest an accompanying morphological transition rather than a gradual weakening of the polystyrene domains. |
