On the Viscous Drag of a Plate with Spherical Recesses

The drag of flat plates with spherical recesses was measured using the direct balance method. The experiments were run in a low-turbulence wind tunnel with a cross-section measuring 1000 × 1000 mm and a length of 400 mm. Three surfaces with recesses 7.0, 3.9, and 1.3 mm in diameter and 0.5, 0.3, and 0.2 mm deep, respectively, were tested. It is shown that on the Reynolds and Mach number ranges Re= (3–9)· 10⁶ and M 0.3 the spherical recesses add to the drag of a flat plate in turbulent flow. The recesses have almost no effect on the location of laminar-turbulent transition, which occurs at Re_t 3· 10⁶.