| Abstract: | In analyzing the processes of the displacement of oil, in which intensive interphase mass transfer takes place, it is normally assumed that the partial volumes of the components as they mix are additive (Amagat's Law) [1, 2]. Then the equations of motion have an integral, which is the total volume flow rate through the porous medium, and the basic problems of frontal displacement, if there are not too many components in the system, permit an exact analytical study to be made [3–5]. If this assumption is rejected, the total flow becomes variable [3, 6, 7]. It appears that the consequences of this as applied to the processes of the displacement of oil by high pressure gases have not previously been considered. The results of such a study, developing the approach outlined in [4], are given below. The initial multicomponent system is simulated by a three-component one which contains oil (the component being displaced), gas (the neutral or main displacing component), and intermediate hydrocarbon fractions or solvent (the active component). It is shown that instead of the triangular phase diagram (TPD) normally used where the partial volumes of the components are additive, in this case it is convenient to use a special spatial phase diagram (SPD) of the apparent volume concentrations of the components to construct the solutions and to interpret them graphically. The method of constructing the SPD and its main properties are explained. A corresponding graphoanalytical technique is developed for constructing the solutions of the basic problems of frontal displacement which correspond to motions with variable total flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 113–120, May–June, 1985. |
