首页 | 本学科首页   官方微博 | 高级检索  
     检索      

智能楼宇监测系统研究
引用本文:刘士兴,邓立琼,何方,谢金玲.智能楼宇监测系统研究[J].合肥工业大学学报(自然科学版),2010,33(2).
作者姓名:刘士兴  邓立琼  何方  谢金玲
作者单位:合肥工业大学电子科学与应用物理学院,安徽,合肥,230009
基金项目:合肥工业大学学生科技创新基金资助项目 
摘    要:文章研究一种基于单总线的智能楼宇监测系统,实现对多点环境温度、湿度和火灾烟雾的实时监测。温度测量选用单总线智能温度传感器DS18B20,直接输出被测点温度的数字量;湿度和烟雾量的测量则通过湿度传感器HIH-3610和反射式光电感烟探测器输出模拟信号,经串行A/D转换器就地进行模数转换,再通过单总线接口按照1-Wire通信协议与温度传感器连到同一根串行通信总线上;检测信号的获取由单片机控制,单片机系统通过RS-232/485接口与PC主控制器相连,PC机上运行基于LabVIEW平台开发的后台监控软件,通过可视化模块实现监控场所的虚拟再现以及远程监测。

关 键 词:楼宇监测  单总线  温湿度  火灾烟雾

Research on intelligent building monitoring system
LIU Shi-xing,DENG Li-qiong,HE Fang,XIE Jin-ling.Research on intelligent building monitoring system[J].Journal of Hefei University of Technology(Natural Science),2010,33(2).
Authors:LIU Shi-xing  DENG Li-qiong  HE Fang  XIE Jin-ling
Abstract:The monitoring system of intelligent buildings based on 1-Wire bus can realize the real-time monito-ring of the multi-point temperature,humidity and fire smoke.In temperature measurement,the intelligent temperature sensors DS18B20 are adopted,which can directly produce the figures of measured temperature.The measurement of humidity and smoke is through the humidity sensors HIH-3610 and photoelectric smoke detectors to output analog signals,and in situ analog-digital conversion is realized by the serial ADC DS2450.Then they connect to the 1-Wire with temperature sensors together through the 1-Wire interface in accordance with the 1-Wire communication agreement.The signal detections of access is controlled by the MCU.The MCU system connects to the PC through RS-232/485 interface.The monitoring software based on LabVIEW runs on the PC,thus achieving a virtual monitoring environment reproduction and remote monitoring through visualivation module.
Keywords:LabVIEW  building monitoring  1-Wire bus  temperature and humidity  fire smoke  LabVIEW
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号