A Kolsky Torsion Bar Technique for Characterization of Dynamic Shear Response of Soft Materials |
| |
| Authors: | X Nie R Prabhu W W Chen J M Caruthers T Weerasooriya |
| |
| Institution: | (1) School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA;(2) School of Chemical Engineering, Purdue University, West Lafayette, IN 47907, USA;(3) School of Aeronautics and Astronautics and School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA;(4) US Army Research Laboratory, Aberdeen Proving Ground, Aberdeen, MD 21005, USA |
| |
| Abstract: | A novel Kolsky torsion bar technique is developed and successfully utilized to characterize the high strain rate shear response
of a rate-independent end-linked polydimethylsiloxane (PDMS) gel rubber with a shear modulus of about10 KPa. The results show
that the specimen deforms uniformly under constant strain rate and the measured dynamic shear modulus follows reasonably well
the trend determined by dynamic mechanical analysis (DMA) at lower strain rates. For comparison, Kolsky compression bar experiments
are also performed on the same gel material with annular disk specimens. The dynamic moduli obtained from compression experiments,
however, are an order of magnitude higher than those obtained by the torsional technique, due to the pressure caused by the
radial inertia and end constraints. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
