Preparation and characterization of transparent NiO thin films deposited by spray pyrolysis technique

Nickel oxide thin films were successfully fabricated with various deposition time (t_d = 5, 10, and 15 min) on glass substrates using spray pyrolysis technique. The deposited films undergo thermal treatment at 350 °C for various annealing time (t_a = 0, 15, 30 and 60 min). In this study, the effect of t_d and t_a on film thickness was observed and their influence on structural, morphological and optical properties were investigated. The films deposited with t_d = 5 min showed amorphous structure while the films grown at higher deposition time became partially crystallized with preferred growth along (1 1 1) direction. Heat treatment carried out in air allowed us to tune the polycrystalline structure and the diffraction intensity at preferred peak increases with the increase in t_a which is a consequence of better crystallinity. This was reflected in the AFM micrographs of the films which suggested that the thermal annealing (or increasing t_a) facilitates the process of grain-growth, and improves the crystalline microstructure. The optical transmission of the films was found to vary with t_d and t_a and thus film thickness. The thinner films show higher transparency in the UV–vis spectral region. The optical band gap was blue-shifted from 3.35 eV to 3.51 eV depending on t_a. The effect of t_a on the various optical constants of the NiO films has also been discussed.