Digital image correlation for large deformation applied in Ti alloy compression and tension test

In this paper, digital speckle correlation is used in the measurement of Ti alloy compression and tension test. The key technologies applied in the measurement are discussed in detail, including camera calibration with telephoto lens and digital image correlation in large deformation. Single camera self-calibration algorithm based on photogrammetry is proposed. In the algorithm, the interior parameters of camera are estimated without calibrated object, using the bundle adjustment technique, so the 3-D coordinates of calibration target points are not needed in advance to get a reliable camera calibration result. An updating reference image scheme could be employed to deal with large deformation situation. A large deformation measurement scheme, updating reference image scheme, is proposed in this paper. The un-deformed image is used as reference in correlation at first. Only for extremely large deformation field, in which iteration of correlation is not convergent, the reference image is updated to the image of previous deformed stage. Using this method, not only extremely large deformation can be measured successfully but also the accumulated error could be controlled. The 75 mm lens is calibrated in the measurement and compared the result with extensometer and un-calibrated image. Experimental results show that up to 150% tensile deformation and 50% compression deformation can be measured successfully.