首页 | 本学科首页   官方微博 | 高级检索  
     检索      

氢在电镀锌层中的扩散渗透性的研究
引用本文:曹江利.氢在电镀锌层中的扩散渗透性的研究[J].电化学,1999(2).
作者姓名:曹江利
作者单位:北京科技大学表面科学与腐蚀工程系
基金项目:冶金工业部腐蚀-磨蚀开放实验室资助项目
摘    要:针对氢在镀锌层中的扩散渗透性,采用电化学氢渗透技术对Fe/电镀Zn双层试样进行了研究.得到了镀锌层的厚度对镀层氢扩散系数以及氢稳态渗透通量的影响方式.研究结果表明,电镀锌层中氢扩散系数约为10-11cm2·s-1数量级,镀锌层能够阻滞氢的扩散渗透.相应地,随镀层厚度增大,试样氢稳态渗透通量和氢有效扩散系数减小

关 键 词:氢,扩散,电镀层,锌

氢在电镀锌层中的扩散渗透性的研究
Cao JiangliWu JixunLu YanpingShi Jie.氢在电镀锌层中的扩散渗透性的研究[J].Electrochemistry,1999(2).
Authors:Cao JiangliWu JixunLu YanpingShi Jie
Institution:Cao Jiangli*Wu JixunLu YanpingShi Jie
Abstract:The electrochemical hydrogen_permeation technique was used to study hydrogen permeation through zinc electrodeposit with bilayer specimens of Fe substrate/zinc electrodeposit.The effect of coating thickness on hydrogen diffusion coefficient and hydrogen steady-state flux was studied. The results showed that hydrogen diffusion coefficient was approximately in the range of 10-11 cm2s-1 rank and zinc coating could retard hydrogen permeation. Accordingly, hydrogen steady_state flux and effective diffusion coefficient declined while the coating thickness increased.
Keywords:Hydrogen  Diffusion  Electrodeposit  Zinc  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号