| 基于MATLAB GUI的钻井工具姿态采集处理系统 |
| |
| 引用本文： | 丁旭东,周静,李炳建.基于MATLAB GUI的钻井工具姿态采集处理系统[J].电子测试,2008(6):5-8,38. |
| |
| 作者姓名： | 丁旭东 周静 李炳建 |
| |
| 作者单位： | 1. 西安石油大学井下测控研究所 西安 710065
2. 延长油田股份有限公司甘谷驿采油厂 延安 716005 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 本文主要涉及MATLAB在钻井工具空间姿态测量方面的应用,采用MATLAB环境下的GUI图形用户界面编程方法编制了上位机软件.该上位机软件通过对串口的操作和对Activex控件的调用,在室内模拟钻井实验中,实现了PC与片上系统C8051F060在115 200波特率下的串行通信、多路数据采集的控制及数据传输、处理,最终实现了对钻井工具空间姿态的测量.
|
| 关 键 词： | 姿态测量 串行通信 Activex控件 |
Drilling tools posture acquisition and processing system based on MATLAB GUI |
| |
| Ding Xudong,Zhou Jing,Li Bingjian.Drilling tools posture acquisition and processing system based on MATLAB GUI[J].Electronic Test,2008(6):5-8,38. |
| |
| Authors: | Ding Xudong Zhou Jing Li Bingjian |
| |
| Institution: | Ding Xudong~1 Zhou Jing~1 Li Bingjian~2 (1 Xi\'an ShiYou University Downhole Measure , Control Institute,Xi\'an 710065,China,2 Can Gu Yi Oil Production Plant,Yan chang Petroleum Company Limited,Yan\'an 716005,China) |
| |
| Abstract: | This paper mainly involves the measurement on drilling tools space posture using MATLAB.The system software with the PC is programmed,using the GUI graphical user in- terface programming method in MATLAB environment.Through the serial port operation and called on Activex controls,PC software realizes the serial communications between PC and sys- tem-on-chip C8051F060 at baud rate of 115 200 b/s,multi-channel data acquisition and drilling tools space posture measurement with the help of the software. |
| |
| Keywords: | GUI C8051F060 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
