首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高钢级钻杆韧性指标的研究
引用本文:李方坡,韩礼红,刘永刚,王勇.高钢级钻杆韧性指标的研究[J].中国石油大学学报(自然科学版),2011,35(5):130-133.
作者姓名:李方坡  韩礼红  刘永刚  王勇
作者单位:1. 中国石油大学机电工程学院,山东青岛266555;中国石油集团石油管工程技术研究院,陕西西安710065
2. 中国石油集团石油管工程技术研究院,陕西西安,710065
3. 中国石油大学机电工程学院,山东青岛,266555
基金项目:中国石油天然气集团公司科学研究与技术开发项目
摘    要:随着超深井、定向井等先进钻井技术的应用,高钢级钻杆G105和S135大量使用,钻杆疲劳失效事故频频发生.高钢级钻杆在失效过程中疲劳裂纹稳定扩展长度为60~80 mm.推导出钻杆发生“先刺后断”失效模式的材料韧性指标——冲击功的计算公式,并首次提出应力强度比系数的表示方法.计算结果表明:钻杆材料的冲击功要求值随钻杆临界裂...

关 键 词:高钢级钻杆  失效模式  疲劳  冲击功  韧性指标

Investigation on toughness index of high grade steel drill pipe
LI Fang-po,HAN Li-hong,LIU Yong-gang,WANG Yong.Investigation on toughness index of high grade steel drill pipe[J].Journal of China University of Petroleum,2011,35(5):130-133.
Authors:LI Fang-po  HAN Li-hong  LIU Yong-gang  WANG Yong
Institution:1 (1.College of Electromechanical Engineering in China University of Petroleum,Qingdao 266555,China; 2.CNPC Tubular Goods Research Institute,Xian 710065,China)
Abstract:Due to the development and application of ultra-deep well and directional well drilling technologies,high grade steel drill pipes,such as G105 and S135,are used widely.The drill pipe failure incidents occur frequently.The fatigue crack length of high grade steel drill pipe is about 60-80 mm at steady developing stage.The impact energy formula of leak before break failure mode was proposed,and stress strength coefficient was introduced for the first time.The results show that the impact energy value increase...
Keywords:high grade steel drill pipe  failure mode  fatigue  impact energy  toughness index  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号