Water penetration in nylon 6,6: Absorption,desorption, and exchange studied by NMR microscopy

The uptake of water by nylon 6,6 42DB Adipure (trade name of Dupont Canada Inc.)] at 100°C has been monitored by a combination of one-dimensional proton NMR spectroscopy, relaxation time (T₁ and T₂) measurements and proton microscopic NMR imaging techniques. The relaxation times of the water absorbed into the nylon matrix are very short at room temperature, (T₂ < 1 ms and T₁ ≈ 1 s) indicating that the water is located in a highly restricted environment and suggesting that strong interactions exist between the absorbed water and the polymer. The diffusion profiles measured at room temperature indicate that the diffusion of water into nylon 6,6 at 100°C is Case I Fickian diffusion. The spatial dependence of the T₂ relaxation time constant and its variation with the water content was also examined. The results reveal that both T₂ and T₂^* decrease toward the center of the sample in samples that have a concentration gradient of sorbed water. In fully saturated samples, no spatial dependence was observed. The overall values of T₂ and T₂^* are also observed to increase as a function of exposure time. An evaluation of the desorption process at room temperature and at 100°C was performed. A continuous, exponentially decreasing solvent profile was observed for the desorption process which again indicates Case I Fickian kinetics. The exchange process of external bulk and atmospheric water with deuterium oxide (D₂O) saturated nylon rods has also been studied using the microscopic imaging technique. © 1993 John Wiley & Sons, Inc.