| Abstract: | Structured latex particles prepared by emulsion polymerization were used as a model to simulate the interphase region between two phases. Multiphase polymer films comprised of high and low permeability polymers of various compositions were used. The model system consisted of a poly(n-butyl methacrylate) (PBMA) matrix and a discontinuous phase with core and shell morphology. The structured particle had a PBMA core and a vinylidene chloride – n-butyl methacrylate (VDC–BMA) copolymer shell. The shell transport characteristics wer altered by changing the (VDC–BMA) copolymer molar ratio. The physical and transport properties for each individual component were measured. Nitrogen was the probe gas. Films used for permeation experiments were prepared by latex casting. The results showed that the morphology of a heterogeneous polymeric system and the transport characteristics of their components had a considerable effect on the magnitude of the transport properties. Experimental data also showed the dependence of the gas global permeability coefficient on the nature of the simulated interphase region, the shell, and the weight percentage of such interphase in the heterogeneous polymeric films. Upon increasing the VDC content in the VDC–BMA copolymer, the gas permeability decreased. The data were fitted to the electrical analogs of conductivity in composite systems. For the matrix filled with structured particles the overall permeability coefficient could best be described when the individual permeabilities were considered as the inverse resistances in parallel. |
