| Abstract: | Removal of uranium from contaminated carbon steel surfaces by chelation with hydroxycarboxylic acid has been tested as a cleaning process for decommissioning and decontaminating contaminated surfaces. Comparison of contaminated surfaces prior to decontamination with subsequently cleaned surfaces was done in order to study the effectiveness of this cleaning technique. This was accomplished using various spectroscopic techniques, including x‐ray photoelectron spectroscopy, synchrotron infrared microspectroscopy, Rutherford backscattering spectroscopy and scanning electron microscopy/energy‐dispersive spectroscopy. Mild carbon steel (1010) coupons were exposed to uranyl nitrate solution, which led to the formation of a lightly corroded surface. Some contaminated samples underwent further cyclic humidity treatment, during which additional corrosion took place. In this study, it was found that a citric acid–hydrogen peroxide–citric acid cleaning method successfully removed uranium in lightly corroded areas. However, the method but incompletely decontaminated some heavily corroded areas where more highly crystallized corrosion products are found or where complex surface structure can occlude contaminants. Use of complementary analytical techniques is essential to provide an accurate model of surface chemistry before and after decontamination. Copyright © 2004 John Wiley & Sons, Ltd. |
