The effect of astigmatism due to beam refractions on the formation of the measurement volume in LDA measurements

The accuracy of LDA measurements depends on the optical alignment of the laser beams. Improperly designed optical systems lead to fringe distortion in the measurement volume and in earlier investigations this effect has always been taken as the main cause of optical inaccuracy in LDA measurements. In the present work a different cause of fringe distortion is considered: astigmatism due to beam refractions. A quantitative theory for the astigmatism of laser beams is derived for both single and multiple refractions. Parameter calculations with regard to the size of the astigmatism effect have been carried out. It is shown that astigmatism is a relevant parameter which influences the fringe uniformity and fringe distortion in an LDA measurement volume and affects the measurement accuracy of measurements in internal flow. The equations derived enable the change in cross sections of the refracted laser beams to be determined. The spatial deviations of the diverse focusing points of refracted laser beams relative to the position of the LDA measurement volume are found to depend strongly on the incident angle of the beams and therefore on the off-axis alignment angle of the LDA probe (off-axis from the normal to the flow-wall-interface).