首页 | 本学科首页   官方微博 | 高级检索  
     

强流束流偏角探测器模拟与测试
引用本文:庞健,何小中,代志勇,李勤,赵良超,马超凡. 强流束流偏角探测器模拟与测试[J]. 强激光与粒子束, 2014, 26(4): 045103-328. DOI: 10.11884/HPLPB201426.045103
作者姓名:庞健  何小中  代志勇  李勤  赵良超  马超凡
作者单位:1.中国工程物理研究院 流体物理研究所, 脉冲功率科学与技术重点实验室, 四川 绵阳 621 900
基金项目:国家自然科学基金项目(11175166)
摘    要:基于束流横向偏角与束流产生轴向磁场成正比的原理,设计了环状PCB结构的轴向B-dot探头,用于直接测量束流偏角。设计并搭建了标定平台对探头进行了测试,同时利用CST MWS程序对探头进行了建模计算。计算结果与实验结果一致,表明了轴向B-dot探头可直接应用于束流偏角测量。分析了影响探头频率适用范围的原因,并根据模拟计算结果给出了改进措施。该探测器在标定平台输入上升时间130ns,半高宽160ns的高压信号时,探头对偏角信号的响应灵敏度为314mV/(kA·mrad)。

关 键 词:轴向B-dot   束流偏角测量   模拟计算   标定平台
收稿时间:2013-09-05

Simulation and test of beam angle monitor for pulsed high current
Affiliation:1.Key Laboratory of Pulsed Power,Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China
Abstract:Beam monitors sensitive to the beams azimuthal B-dot field (sometimes referred as B-dots) are widely used to measure the displacement of beam centroid, as the beam generates a dipole term of the azimuthal magnetic field. Basing on the principle of the proportionality between the deflection angle and the difference of axial B field between the axially symmetrical positions, the axial B-dot probe has a potential use for beam deflection angle measurement. A calibration stand was built to test and improve the beam angle monitor, which was fabricated as a PCB structure. Meanwhile, simulations using the CST MWS codes were performed, demonstrating a good agreement with test results and giving some advices to suppress the disturbance of position deviation of the beam. Both the simulations and the experiments show that the axial B-dot monitor can be successfully used to measure the beam tilt directly.
Keywords:axial B-dot  beam deflection angle measurement  simulation  calibration stand
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号