首页 | 本学科首页   官方微博 | 高级检索  
     

对受激布里渊散射激光进行组束的数值模拟及方案设计
引用本文:王双义, 林殿阳, 吕志伟, 等. 对受激布里渊散射激光进行组束的数值模拟及方案设计[J]. 强激光与粒子束, 2003, 15(09).
作者姓名:王双义  林殿阳  吕志伟  赵晓彦  王超  王晓慧
作者单位:1.哈尔滨工业大学 光电子技术研究所, 黑龙江 哈尔滨 1 50001
摘    要:提出了时间上串行的多路激光脉冲通过受激布里渊散射(SBS)池进行组束的方法,并对其进行了数值模拟研究。利用6束每束能量为45J的KrF激光进行组束, 可获得能量为141.89J,脉宽为670ps的Stokes输出光。根据模拟结果设计出了时间上串行的SBS激光组束的两个方案, 对其进行了讨论。数值模拟还发现在介质的增益系数更大、声子寿命更短的情况下,输出激光脉冲的脉宽可以压缩得更窄。

关 键 词:受激布里渊散射   组束   数值模拟

Numerical simulation and scheme design for laser beam combination of stimulated Brillouin scattering
wang shuang yi, lin dian yang, l zhi wei, et al. Numerical simulation and scheme design for laser beam combination of stimulated Brillouin scattering[J]. High Power Laser and Particle Beams, 2003, 15.
Authors:wang shuang yi  lin dian yang  l zhi wei  zhao xiao yan  wang chao  wang xiao hui
Affiliation:1. Institute of Opto Electronics,Harbin Institute of Technology,Harbin 150001,China
Abstract:A novel scheme for multi stage serial stimulated Brillouin scattering(SBS) laser beam combination was presented and numerical simulations were made. In the scheme, six pumping beams with equal energy and pulse width pumped six SBS cells respectively, and a seed beam was injected and passed the six SBS cells in sequence. Numerical simulation shows that six KrF pumping beams with energy of 45J and pulse width of 23ns produce an output Stokes beam with energy of 141.89J and pulse width of 670ps. Numerical simulation also shows that shorter output pulse duration can be obtained, while medium gain is higher and phonon lifetime is shorter.
Keywords:stimulated brillouin scattering  beam combination  numerical simulation
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号