首页 | 本学科首页   官方微博 | 高级检索  
     检索      

应变幅值对循环载荷下NiTi合金力学性质的影响
引用本文:张振华,刘宁,绳飘,张爱蒙,薛飞.应变幅值对循环载荷下NiTi合金力学性质的影响[J].实验力学,2017(3):407-413.
作者姓名:张振华  刘宁  绳飘  张爱蒙  薛飞
作者单位:1. 河南理工大学土木工程学院,河南焦作,454000;2. 西北工业大学力学与土木建筑学院,陕西西安,710072
基金项目:国家自然科学基金资助项目(51308195),河南省科技厅科技攻关项目(132102210252)
摘    要:实验研究了应变幅值对循环载荷下NiTi合金伪弹性退化特征的影响规律,结果表明:当卸载发生在NiTi合金应力诱发马氏体相变阶段时,应变幅值对马氏体相变开始应力的退化规律影响较小,但此时应变幅值的增加会显著增大奥氏体弹性模量的退化程度,而其大变形可回复能力和阻尼特性在应变幅值大于6%时才有大幅度降低。对各参数退化程度进行定量分析,得到了NiTi合金具有较强可回复能力和阻尼性能的应变幅值范围。该研究可为NiTi合金阻尼器的设计提供参考。

关 键 词:形状记忆合金  NiTi合金  伪弹性  应变幅值  循环载荷

On the Influence of Strain Amplitude on Mechanical Properties of Niti Alloy Subjected to Cyclic Loading
ZHANG Zhen-hua,LIU Ning,SHENG Piao,ZHANG Ai-meng,XUE Fei.On the Influence of Strain Amplitude on Mechanical Properties of Niti Alloy Subjected to Cyclic Loading[J].Journal of Experimental Mechanics,2017(3):407-413.
Authors:ZHANG Zhen-hua  LIU Ning  SHENG Piao  ZHANG Ai-meng  XUE Fei
Abstract:The influence of strain amplitude on pseudoelasticity degradation characteristics of NiTi alloy subjected to cyclic loading was experimentally studied.Results indicate that when the unloading occurs on the stage of NiTi alloy martensite transformation,which is induced by stress,strain amplitude has little influence on degradation characteristics at the beginning of the martensitic transformation;but at the same time,the increase of strain amplitude may significantly increase the degradation degree of austenite elastic modulus;and the large deformation resilience and damping capability can be reduced significantly only when the strain amplitude is larger than 6%.Through quantitative analysis of degradation degree,the strain amplitude range corresponding strong resilience and damping property of NiTi alloy was obtained.Above results can provide reference for design of NiTi alloy damper.
Keywords:shape memory alloy  NiTi alloy  pseudoelasticity  strain amplitude  cyclic loading
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号