首页 | 本学科首页   官方微博 | 高级检索  
     

1维光子晶体缺陷模
引用本文:李志全,康莉莉,苏风燕. 1维光子晶体缺陷模[J]. 强激光与粒子束, 2009, 21(5)
作者姓名:李志全  康莉莉  苏风燕
作者单位:燕山大学 电气工程学院, 秦皇岛 066004
摘    要: 利用光学传输矩阵理论对掺杂1维光子晶体的缺陷模进行了研究。计算和分析了缺陷层折射率、缺陷层厚度与缺陷峰的关系。得出结论:随着缺陷层厚度的增大,缺陷峰波长呈线性增加,但是当缺陷层厚度增加到一定值时,缺陷峰的个数也将不断增加;缺陷层折射率也与缺陷峰波长有线性正比关系。从而提出了一种在微波领域测量介质折射率和介电常数的有效方法。

关 键 词:1维光子晶体  传输矩阵法  缺陷模  介质折射率  介电常数
收稿时间:1900-01-01;

Defect mode in one-dimensional photonic crystal
Li Zhiquan,Kang Lili,Su Fengyan. Defect mode in one-dimensional photonic crystal[J]. High Power Laser and Particle Beams, 2009, 21(5)
Authors:Li Zhiquan  Kang Lili  Su Fengyan
Affiliation:Institute of Electrical Engineering, Yan Shan University, Qinhuangdao 066004, China
Abstract:Numerical calculating on the defect mode in the one-dimensional (1-D) photonic crystal by the optical transmission matrix method was studied. We calculated and analyzed the relationship between refractive index of the defect layer and wavelength of the defect peak and the relationship between defective layer’s thickness and wavelength of the defect peak. It is found that with increasing of the defective layer’s thickness, the wavelength of the defect peak increases linearly. But much more defect peaks would be found when defective layer’s thickness comes to a constant. Additionally, refractive index of the defect layer increases linearly with the increasing wavelength of the defect peak. So, a more effective method of measuring refraction and dielectric constants in microwave field is p
Keywords:transfer matrix method  defect mode  refraction  dielectric constant
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号