SIMS Profiling and TEM of CVD Films on Multi-Filament Samples

 A suitable fibre coating is essential to obtain optimal fibre-matrix interaction in fibre-strengthened composite materials. Thin films (∼100 nm) of silicon carbide, turbostratic carbon, and boron nitride were deposited by CVD as single or double layers on commercial multi-filament fibres in a continuous process. The fibre material itself may be carbon, alumina, silicon carbide, or a quaternary ceramic of SiCBN. The application of MCs⁺-SIMS enables one to determine the composition (including impurities of H and O) of various fibre coating materials with an accuracy of at least 20% relative. Due to the special geometry of the multi-filament samples the depth resolution of the SIMS depth profiles is limited, nevertheless, layered structures and some details of the interface between coating and fibre can be studied. The depth calibration of the SIMS depth profiles is derived from sputter rates established on flat samples with a composition similar to that of the fibre coating material. However, the obtained film thicknesses are not extremely different from the values derived from TEM on cross sections of coated fibres.