Abstract: | The surfaces of various mechanical pulp fibres, including thermomechanical pulp (TMP), chemithermomechanical pulp (CTMP), and alkaline peroxide mechanical pulp (APMP) fibres, were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray photoelectron spectroscopy (XPS). With SEM and AFM, the middle lamella material was observed to be non‐fibrillar and patch‐like, while the fibre secondary wall was observed to have a micro‐fibrillar structure. It was found that after the first‐stage refiner, lignin‐rich middle lamella remainders were present on the fibre surface of all three pulps, although most of the fibre surfaces exhibited a micro‐fibrillar structure. After the final‐stage refining, large amounts of granules were present on the TMP fibre surface. In contrast, most middle lamella remainders were still visible on the surface of CTMP fibres after the final‐stage refining and even after peroxide bleaching. XPS results have confirmed that the non‐fibrillar surface material is the lignin‐rich middle lamella remainder that contribute to the high surface lignin concentration. Copyright © 2006 John Wiley & Sons, Ltd. |