高功率半导体激光器光纤耦合实验研究 |
| |
引用本文: | 余俊宏,郭林辉,高松信,谭昊,尹新启.高功率半导体激光器光纤耦合实验研究[J].强激光与粒子束,2014,26(5):051005-37. |
| |
作者姓名: | 余俊宏 郭林辉 高松信 谭昊 尹新启 |
| |
作者单位: | 1.中国工程物理研究院 应用电子学研究所, 四川 绵阳 621 900; |
| |
基金项目: | 国家自然科学基金重大项目(60890201);中国工程物理研究院应用电子学研究所所自研课题(2011JGZY05 ) |
| |
摘 要: | 为进一步提高光纤耦合半导体激光器的输出功率,提出了一种多单管半导体激光器通过台阶分布、光束精密准直及自由空间合束实现高功率光纤耦合输出的方法,该方法具有结构简单、光学元件易于加工、耦合效率高等优点。采用这种方法对5只封装在次热沉上的单管半导体激光器开展了芯径100μm、数值孔径0.22多模光纤的耦合实验研究,当工作电流为7.0 A时,光纤连续输出功率为21.8 W,亮度为1.83 MW/(cm~2·sr),耦合效率为70.32%。
|
关 键 词: | 高功率激光 半导体激光器 光纤耦合 空间合束 |
收稿时间: | 2013/12/3 |
Research on high-power single emitter fiber-coupled diode laser |
| |
Institution: | 1.Institute of Applied Electronics,CAEP,P.O.Box 919-1015,Mianyang 621900,China;2.Key Laboratory of Science and Technology on High Energy Laser,CAEP,P.O.Box 919-1015,Mianyang 621900,China |
| |
Abstract: | The paper investigates a fiber-coupled method based on single emitter diode laser mounted on copper sub-heatsink by steps and mirror model. The output beam collimated with aspherical cylindrical lens and cylindrical lens in the fast and slow axis directions could be coupled into a fiber of 100 m core diameter and 0.22 numerical aperture. The measurement result shows that the continuous wave(CW) fiber output power can achieve 21.8 W, brightness is 1.83 MW/(cm2sr) and the total coupling efficiencies are 70.32% at operation currents of 7.0 A. |
| |
Keywords: | high power laser diode laser fiber coupling spatial multiplexing |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|