Surface and bulk ordering in thin films of a symmetrical diblock copolymer

Amphiphilic diblock copolymers have the ability to adapt their surface's molecular composition to the hydrophilicity of their environment. In the case of about equal volume fractions of the two polymer blocks, the bulk of these polymers is known to develop a laminar ordering. We report here our investigation of the relationship between bulk ordering and surface morphology/chemical composition in thin films of such an amphiphilic diblock copolymer. Upon annealing in vacuum, the expected lamella ordering in the bulk of the film is observed and we find the morphology of the film surface to be defined by the thickness of the as‐deposited film: If the as‐deposited thickness matches the height of a lamella stack, then the film exhibits a smooth surface. Otherwise, an incomplete lamella forms at the film surface. We show that the coverage of this incomplete layer can be quantified by X‐ray reflectivity. To establish the lamella ordering in the bulk, the film needs to be annealed above the glass temperature of the two blocks. Molecular segregation at the film surface, however, is already occurring at temperatures well below the glass temperature of the two blocks. This indicates that below the glass temperature of the blocks the bulk of the thin film is “frozen,” whereas the polymer chains composing the surface lamella have an increased mobility. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys., 2013 , 51, 1282–1287