首页 | 本学科首页   官方微博 | 高级检索  
     

金属杆内疲劳裂纹与振动/超声相互作用及其定量表征
引用本文:刘斌, 刚铁, 万楚豪, 罗志伟, 栾亦琳. 金属杆内疲劳裂纹与振动/超声相互作用及其定量表征[J]. 声学学报, 2016, 41(4): 507-514. DOI: 10.15949/j.cnki.0371-0025.2016.04.008
作者姓名:刘斌  刚铁  万楚豪  罗志伟  栾亦琳
作者单位:1 哈尔滨工业大学先进焊接与连接国家重点实验室 哈尔滨 150001;
基金项目:国家自然科学基金(51575134,51175113,51105033,51205083)资助
摘    要:根据同步解调的原理,考察振动声调制检测输出信号中的调制成分,对金属杆内振动/超声在裂纹面上的相互作用进行了分析.制作了含有不同尺寸裂纹的铝杆试样,以扫频激励的方式得到合适的高频激励参数,分析输出信号中的调制信息,发现工件中的高频超声可分为两部分:一部分声波通过裂纹面,受到低频振动信号的调制,另一部分则保持不变。在此基础上对非线性调制模型进行了修正,并提出了一种用于裂纹检测的定量方法。与超声C扫描检测结果对比表明,此定量方法可用于估计金属杆中疲劳裂纹尺寸。

关 键 词:疲劳裂纹  裂纹面  裂纹尺寸  定量表征  输出信号  同步解调  高频超声  超声能量  低频振动  裂纹检测
收稿时间:2014-12-08
修稿时间:2015-04-08

Interaction of fatigue crack with vibration and ultrasound in metallic rod and its use for quantitative characterization
LIU Bin, GANG Tie, WAN Chuhao, LUO Zhiwei, LUAN Yilin. Interaction of fatigue crack with vibration and ultrasound in metallic rod and its use for quantitative characterization[J]. ACTA ACUSTICA, 2016, 41(4): 507-514. DOI: 10.15949/j.cnki.0371-0025.2016.04.008
Authors:LIU Bin  GANG Tie  WAN Chuhao  LUO Zhiwei  LUAN Yilin
Affiliation:1 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology Harbin 150001;2 School of Materials Science and Engineering, Heilongjiang University of Science and Technology Harbin 150022
Abstract:According to the principle of synchronous demodulation, the modulation information in the output signal of vibro-acoustic modulation test was investigated and the nonlinear interaction of sound and vibration on the crack interface in a metallic rod was analyzed. A swept signal excitation was used to obtain a proper high frequency parameter in the test of aluminum rod samples with different size of crack, and the modulation information in the output signal was analyzed. It was found that the ultrasound wave in the structure can be separated into two parts. One is the wave which passes through the crack interface modulated by the low frequency vibration, and other wave has no any changes. The nonlinear modulation model was modified and a quantitative method for crack detection was proposed. It is demonstrated by comparing with the ultrasonic C-scanning that this method can be used to estimate the fatigue crack size in the metallic rod. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《声学学报》浏览原始摘要信息
点击此处可从《声学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号