Interface photoluminescence of the SnO2:F/CdS:In/CdTe thin film solar cells prepared partially by the spray pyrolysis technique

CdS/CdTe solar cells were built by depositing a 200 nm layer of SnO₂:F on glass substrates by the spray pyrolysis (SP) technique, a 500 nm CdS:In layer by the same technique and a 1–1.5 μm CdTe layer by vacuum evaporation. The cells were CdCl₂ heat-treated in nitrogen atmosphere for 30 min at 350 °C. The photoluminescence (PL) spectra were measured at the CdS/CdTe interface for two cells with different values of the CdTe layer's thickness at the temperature T=60 K. A deconvolution peak fit was performed from which it is found that the peaks are characteristic of the solid solution CdS_xTe_1?x. The parabolic relation that relates the bandgap energy with the composition was used to estimate x, where x is [S]/([Te]+[S]) and [Te], [S] are the concentrations of Te and S atoms, respectively. The results show that the interface is smooth and the change of the bandgap occurs gradually. The solar cell of the thicker CdTe layer showed more interdiffusion at the CdS/CdTe interface and better photovoltaic characteristics.