首页 | 本学科首页   官方微博 | 高级检索  
     

电感耦合等离子体发射光谱法测定E10乙醇汽油中的钠和锌
引用本文:黄开胜,徐董育,陈树娣,陈晓燕,赵彦. 电感耦合等离子体发射光谱法测定E10乙醇汽油中的钠和锌[J]. 光谱学与光谱分析, 2021, 41(3): 973-977. DOI: 10.3964/j.issn.1000-0593(2021)03-0973-05
作者姓名:黄开胜  徐董育  陈树娣  陈晓燕  赵彦
作者单位:深圳市计量质量检测研究院,广东 深圳 518131;深圳市计量质量检测研究院,广东 深圳 518131;深圳市计量质量检测研究院,广东 深圳 518131;深圳市计量质量检测研究院,广东 深圳 518131;深圳市计量质量检测研究院,广东 深圳 518131
基金项目:2014年度国家质监总局科技项目(2014QK054);2015年度广东省质监局科技项目(2015CZ06)资助。
摘    要:车用乙醇汽油是一种新型、清洁的汽车燃料,在燃烧过程中,微量的重金属杂质对汽车的行驶和养护有着至关重要的影响,一些燃烧产物可能会污染环境,威胁人们的身体健康,因此有必要对其中的微量元素进行控制.以异辛烷稀释汽油样品,电感耦合等离子体发射光谱(IC P-O ES)法测定车用E10乙醇汽油中钠、锌含量的方法,选择钠和锌的分析...

关 键 词:E10乙醇汽油  电感耦合等离子体发射光谱  半导体制冷雾化系统    
收稿时间:2020-02-20

Determination of Sodium and Zinc in Ethanol Gasoline for Motor Vehicles(E10)by ICP-OES
HUANG Kai-sheng,XU Dong-yu,CHEN Shu-di,CHEN Xiao-yan,ZHAO Yan. Determination of Sodium and Zinc in Ethanol Gasoline for Motor Vehicles(E10)by ICP-OES[J]. Spectroscopy and Spectral Analysis, 2021, 41(3): 973-977. DOI: 10.3964/j.issn.1000-0593(2021)03-0973-05
Authors:HUANG Kai-sheng  XU Dong-yu  CHEN Shu-di  CHEN Xiao-yan  ZHAO Yan
Affiliation:Shenzhen Academy of Metrology Quality and Inspection,Shenzhen 518131,China
Abstract:Ethanol gasoline for motor vehicles(E10)is a new and clean automobile fuel.In the combustion process,trace heavy metal impurities have a crucial impact on the driving and maintenance of the car.Some combustion products may pollute the environment and threaten people’s health.Therefore,it is necessary to control the trace elements.The method with the direct dilution of isooctane was used to realize the quantitative determination of sodium and zinc in ethanol gasoline,The spectral lines of sodium and zinc were respectively 589.592 and 213.857 nm,the effects of atomization gas flow rate and peristaltic pump speed on the signal to back ratio were optimized.The semiconductor refrigeration atomization system(the temperature of the atomization chamber was set to -10℃)was applied to reduce the volatility of ethanol gasoline.At the same time,the effects of dilution ratio,standard internal elements and diluent types were studied.The results show that:(1)When kerosene was used as the diluent,the recoveries of sodium and zinc were above 120%,and the ratio of Y internal standard was above 1.20,When isooctane was used as the diluent,the recovery rate and standard internal ratio meet the requirements,which may be caused by the high density and viscosity of kerosene at low temperature,it was concluded that isooctane is more suitable as diluent;(2)When Co was selected as the standard internal element,the standard internal ratio of some samples was more than 120%,and when Y was the internal standard,the standard internal ratio meets the requirements,it may be due to the poor stability of Co or the presence of Co in the sample,Y was suitable.(3)The detection limits of sodium and zinc are 0.013 and 0.005 mg·kg-1 respectively.The method showed lower detection limits,and the recoveries ranged from 85.1%~106.0%.The relative standard deviation(RSD)was between 1.0% and 4.8%.(4)Compared with the microwave digestion method,the result of this method is close to the theoretical value,which makes up the disadvantage of the microwave digestion method.The results show that the method was rapid,sensitive and accurate,and it was suitable for the determination of sodium and zinc in ethanol gasoline.
Keywords:Ethanol gasoline for motor vehicles(E10)  ICP-OES  Semiconductor refrigeration nebulizer system  Sodium  Zinc
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光谱学与光谱分析》浏览原始摘要信息
点击此处可从《光谱学与光谱分析》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号