Ultra-sensitive fully automated immunoassay for detection of propanil in aqueous samples: steps of progress toward sub-nanogram per liter detection

The widely-used pesticide propanil is a selective post-emergent general-use acetanilide herbicide registered for control of broadleaf and grass weeds in rice, small grain, and turf. Because broad application and quite heavy use of this herbicide lead to contaminated sites and, consequently, contaminated water, immunoanalytical methods with very low limits of detection (LOD) and low limits of quantification (LOQ) are becoming increasingly important for environmental analysis and, especially, for monitoring drinking-water quality. Environmental monitoring of pesticides, hormones, endocrine-disrupting chemicals, and antibiotics in aqueous samples (e.g. surface, ground, waste, or drinking water) with quite difficult matrices places large demands on chemical analysis. Biosensors have suitable characteristics such as efficiency in enabling very fast, sensitive, and cost-effective detection. Here we describe the steps of progress toward sub-nanogram per liter detection of propanil with a fully automated immunoassay. In contrast with common analytical methods such as GC–MS or HPLC–MS the biosensor used requires no sample pre-treatment and pre-concentration. The basis of our sensitive assay is an antibody with a high affinity constant toward propanil. During the optimization process, we compared different surface modifications (four different immobilized derivatives) and reduced the amount of antibody per sample. In fact, optimization of the assay resulted in an LOD of 0.6 ng L^–1 and an LOQ of 4.5 ng L^–1 without any sample pre-treatment and without pre-concentration. These results for propanil with the RIANA instrument, and its improved sensitivity for detection of a single pesticide at the low nanogram per liter range, show that biosensors can compete with common analytical methods in the field of water analysis.