Measurement of carbonaceous aerosols: validation of a thermal gravimetric method and its comparison with a thermal optical transmittance method

A high throughput thermal gravimetric method was developed to measure the carbonaceous aerosols and particulates collected on filters. Representative portions or the whole piece of a loaded or blank filter was sampled and conditioned at 105±5 °C for 4 h to drive away water moisture. The sample was then treated at 550±10 °C for 4 h. After each of the heat treatment steps, the sample was conditioned in a humidity and temperature-controlled cabinet for 12 h till constant weight. The weight of the filter before and after the heated treatment was measured and the weight difference between the treatment at 550 and 105 °C was calculated as the weight of the carbon containing substances (CCS). Reference chemical standards and certified reference materials SRM 1649a and 1650a were used to validate the method. CCS concentrations of real aerosol samples collected in the city of Hong Kong during the summer of 2001 were also measured, compared and correlated with the concentrations of total carbon (TC), elemental carbon (EC) and organic carbon (OC) of the samples determined using a thermal optical transmittance (TOT) method as specified in NIOSH method 5040. The weight of organic compounds in airborne particulate matters is usually estimated by multiplying the weight of TC, which is determined by thermal/thermal optical methods, by a factor of 1.2 or 1.4. To this end, a correction factor of approximately 1.6 was found to relate TC to the measured values of CCS in aerosol samples collected in the urban atmosphere of Hong Kong. The proposed procedure for measurement of CCS is simple, easy to follow and requires simple laboratory instrumentation. Typically, the analysis of more than 100 filter samples can be completed within three working days with minimal attention.