Tritium activity induced in the accelerator building and its correlation to radioactivity of gamma-nuclides

An infrared furnace (ULVAC RHL-410P) was newly applied to the extraction of tritium from concrete samples. After studying the tritium recovery yield regarding temperature and time, the best extraction conditions were set to 800 °C (setting temperature) for 30 minutes under Ar-gas flow of 200 ml/min. Tritium was collected in two cold traps and transferred to a vial for liquid scintillation counting. It took about one hour for the extraction of tritium. Reproducibility and recovery yield of tritium were about 100% compared to the values obtained by the ordinary heating method using an electric furnace. Gamma-ray emitters and tritium of concrete samples collected from several accelerator facilities have been determined. The specific activity of tritium strongly correlated with that of ¹⁵²Eu and ⁶⁰Co, so it was found that tritium was produced by thermal neutron reaction by the ⁶Li(n,)³H reaction. The results indicate that the tritium specific activity in concrete can be estimated from the ⁶⁰Co specific activity obtained easily by -ray measurement.On leave from IHEP, Beijing.This work was supported by Japan Society for the Promotion of Science. The authors also are grateful to Dr. S. Watanabe, Center for Nuclear Study, University of Tokyo, Dr. T. Ohtsuki, Laboratory of Nuclear Science, Tohoku University, and Dr. T. Saito, Research Center for Nuclear Physics, Osaka University, and their colleagues for concrete sampling.