首页 | 本学科首页   官方微博 | 高级检索  
     检索      

前馈线性功率放大器的设计
引用本文:吴韵秋,唐宗熙,卢子焱,张彪.前馈线性功率放大器的设计[J].电讯技术,2007,47(1):104-107.
作者姓名:吴韵秋  唐宗熙  卢子焱  张彪
作者单位:电子科技大学,电子工程学院,成都,610054;电子科技大学,电子工程学院,成都,610054;电子科技大学,电子工程学院,成都,610054;电子科技大学,电子工程学院,成都,610054
摘    要:从前馈线性功率放大器的基本原理出发,采用HP ADS仿真软件对主功放进行优化设计,并在此基础上,提出加入反馈环路的前馈线性化设计方案,在保证系统性能的同时大大降低了系统实现难度.仿真结果表明该系统在输出10 W连续波功率的同时,三阶交调失真(IMD)低于信号功率-77 dBc,取得了明显的线性度改善效果.

关 键 词:前馈  功率放大器  线性化  设计
文章编号:1001-893X(2007)01-0104-04
收稿时间:4/6/2006 12:00:00 AM
修稿时间:2006-04-062006-09-10

Design of a Feed Forward Linear Power Amplifier
WU Yun-qiu,TANG Zong-xi,LU Zi-yan,ZHANG Biao.Design of a Feed Forward Linear Power Amplifier[J].Telecommunication Engineering,2007,47(1):104-107.
Authors:WU Yun-qiu  TANG Zong-xi  LU Zi-yan  ZHANG Biao
Institution:College of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu 610054, China
Abstract:The principle of the feed forward power amplifier is presented.Then an advanced scheme is proposed to reduce the difficulties of system realization while maintaining system performance.The result shows that the output continuous wave power is 10W and the IMD cancellation reaches a level below-77dBc,which is more acceptable in today's communication systems.
Keywords:feed forward  power amplifier  linearization  design
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电讯技术》浏览原始摘要信息
点击此处可从《电讯技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号