Combined effect of EUV irradiation and acetone treatment on PET surface |
| |
| Authors: | Bartnik A Fiedorowicz H Burdyńska S Jarocki R Kostecki J Szczurek M |
| |
| Institution: | (1) Department of Applied Physics, University of Vigo, Rua Maxwell, Vigo, Spain;(2) College of Material Science and Engineering, South China University of Technology, Guangzhou, China |
| |
| Abstract: | In this work, the radiation from a laser-plasma extreme ultraviolet (EUV) source based on a double-stream gas-puff target
was used for surface modification of polyethylene terephthalate (PET). The spectrum of the wide band radiation focused with
a gold-coated ellipsoidal collector consisted of a narrow feature with maximum at 10 nm and a long-wavelength tail up to 70 nm.
The PET samples were mounted in the focal plane of the EUV collector or at some distance downstream this plane and irradiated
for 0.1 s–2 min with 10-Hz repetition rate. The polymer samples after irradiation were rinsed in acetone. Surface morphologies
of the PET samples after irradiation were investigated using a scanning electron microscope and atomic force microscope. Different
kinds of surface micro- and nanostructures were created as a result of irradiation depending on the EUV fluence and number
of pulses. Acetone treatment of the polymer samples after irradiation resulted in formation of additional nanostructures.
In this case the nanostructures were revealed even after exposure with a single EUV pulse. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
