High-efficiency Q-switched erbium fiber laser using a Bragg grating-based modulator

In this work we analyze the behavior of an erbium-doped fiber laser which is based on a simple scheme. Excitation of the active medium is performed in the 980 nm pump band with a CW semiconductor laser source. Two fiber Bragg gratings acting as mirrors of the Fabry–Perot laser cavity were used. One of these gratings was mounted over a piezoelectric (PZT) element. By applying voltage pulses to the piezoelectric, the laser cavity was temporally modulated and Q-switched laser pulses up to 530 mW peak powers at 3 kHz were obtained. Typical laser emission of 2–3 μs temporal widths and 0.1 nm of optical bandwidth have been achieved when the system was operated at 18.5 kHz repetition rates. Different behaviors were observed depending on the pumping level of the active medium and on the amplitude and frequency of the signal applied on the PZT. Q-switched laser output, in the erbium spectral gain region, with high laser efficiency of energy conversion was generated. Pumping at 76 mW and operating the laser at 18.5 kHz, an efficiency of 26% was obtained.