Nitrogen-doped carbon nanotubes for heat transfer applications |
| |
Authors: | Bazmi Mohammad Askari Saeed Ghasemy Ebrahim Rashidi Alimorad Ettefaghi Ehsanollah |
| |
Affiliation: | 1.Faculty of Chemical Engineering, Amirkabir University of Technology, Hafez Ave, P.O. Box 15875-4413, Tehran, Iran ;2.Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), P.O. Box: 14665-1998, Tehran, Iran ;3.Chemical Engineering Department, Sharif University of Technology, Azadi Ave., P.O. Box 11155-9567, Tehran, Iran ; |
| |
Abstract: | In this research, it is aimed to enhance the heat transfer properties of the carbon nanotubes through nitrogen doping. To this end, nitrogen-doped multiwall carbon nanotubes (N-CNTs) were synthesized via chemical vapor deposition method. For supplying carbon and nitrogen during the synthesis of N-CNTs, camphor and urea were used, respectively, at 1000 °C over Co–Mo/MgO nanocatalyst in a hydrogen atmosphere. N-CNTs with three different nitrogen loadings of 0.56, 0.98, and 1.38 mass% were synthesized, after which, water/N-CNT nanofluids of these three samples with concentrations of 0.1, 0.2, and 0.5 mass% were prepared. To obtain a stable nanofluid, N-CNTs were functionalized by nitric acid followed by stabilizing in water by employing the ultrasonic bath. Investigation on the stability of the samples showed a high stability level for the prepared water/N-CNT nanofluids in which the zeta potential of ??43.5 mV was obtained for the best sample. Also for studying the heat transfer properties, the thermal conductivity in the range of 0.1–0.5 mass% and convection heat transfer coefficients of nanofluids in the range of 0.1–0.5 mass%, and Reynolds number in the range of 4000–9000 were evaluated. The results showed 32.7% enhancement of the convection heat transfer coefficients at Reynolds number of 8676 and 27% increase in the thermal conductivity at 0.5 mass% and 30 °C. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|