Production of a water disinfectant by membrane electrolysis of brine solution and evaluation of its quality change during the storage time

Anolyte solution produced by membrane electrolysis of NaCl solution contains a high level of available chlorine content (ACC) and other oxidizing compounds, rendering this solution a strong disinfectant property. In this paper, some process parameters affecting the anolyte production efficiency, such as total inlet flow (240–320 L/h), saline solution concentration (1.65–3.50 g/L), and the type of membrane (cation exchange, anion exchange, and bipolar membranes) were investigated in an electrolysis cell. Changes in the quality of anolytes produced at three initial concentrations of very high (ACC₁ = 816.5 mg/L), relatively high (ACC₂ = 461.5 mg/L), and medium (ACC₃ = 355.0 mg/L) during storage (from the production up to 20 weeks) were examined by adjusting the total inlet flow, saline concentrations, and membrane types. Changes in the ACC of the produced anolyte solution were generally affected by the type of membrane used in the electrolysis cell. The use of anion exchange membrane resulted in the lowest durability of anolyte quality (60–80% ACC reduction after 4 weeks of storage) and the cation exchange membrane had the highest durability (less than 40% decrease after 4 weeks of storage). In addition, changes in the pH and the oxidation–reduction potential of the anolyte were investigated during the storage period, which had a different trend depending on the type of applied membrane.