Vortex dynamics mechanisms of separated boundary layer in a highly loaded low pressure turbine cascade

This paper investigates the vortex dynamics in the suction-side boundary layer on an aero-engine low pressure turbine blade at two different Reynolds numbers at which short and long laminar separation bubbles occur. Different vortical patterns are observed and investigated through large eddy simulation (LES). The results show that at the higher Reynolds number, streamwise streaks exist upstream of separation line. These streaks initiate spanwise undulation in the form of vortex tubes, which roll-up and shed from the shear layer due to the Kelvin–Helmholtz instability. The vortex tubes alternately pair together and eventually distort and break down to small-scale turbulence structures near the mean reattachment location and convect into a fully turbulent boundary layer. At the lower Reynolds number, streamwise streaks are strong and the separated flow is unable to reattach to the blade surface immediately after transition to turbulence. Therefore, bursting of short bubbles into long bubbles can occur, and vortex tubes have larger diameters and cover a part of the blade span. In this case vortex pairing does not occur and vortex shedding process is promoted mainly by flapping phenomenon. Moreover, the results of dynamic mode decomposition (DMD) analysis show a breathing motion as a source of unsteadiness in the separation location, which is accompanied by the flapping phenomenon.