Synthesis of cation-exchanged laponite suspensions by laser ablation of microsized-metal particles in liquid

Laser ablation in the liquid technique has been used to synthesize cation-exchanged laponite suspensions. In summary, laser ablation of the microsize-metal powder (Co, Al, and Cu) dispersed in an aqueous solution containing deionized water laponite crystals was carried out using laser beam generated by a single-mode, Q-switched Nd-Yag laser operating at 532 nm with a pulse duration of 5.5 ns and 10 Hz repetition rate. Laser fluence was 0.265 J/cm² for all tests. For all samples, the mass fraction of laponite was 1%. General observations of the prepared samples indicated that an aqueous suspension of 1 wt% laponite retained its free flowing liquid phase characteristics even after aging for several weeks. When bivalent cationic metals (Cu, Co, Al) were ablated in it for about 1 h, even with a small amount of the metal (0.025% and 0.050%) were generated, the suspension became highly viscous and behaved as a shear-thinning and thixotropic material. That is, the suspension gelled strongly when it was allowed to rest. The gels, however, could easily be reverted to a low viscosity liquid with simple shaking. Information from TEM and XRD analysis indicated that such a sol-gel transformation might be due to the charge exchange between the cationic species produced during the laser ablation and the sodium ions in the interlayers of the clay sheets.