首页 | 本学科首页   官方微博 | 高级检索  
     检索      

负载型钴锰复合氧化物臭氧辅助催化降解低浓度甲醛的性能研究
引用本文:周吉文,李一倬,范泽云,施建伟,上官文峰.负载型钴锰复合氧化物臭氧辅助催化降解低浓度甲醛的性能研究[J].分子催化,2014(1):60-66.
作者姓名:周吉文  李一倬  范泽云  施建伟  上官文峰
作者单位:上海交通大学,上海交通大学,上海交通大学,上海交通大学,上海交通大学
基金项目:国家高技术研究发展计划(863计划)
摘    要:制备了负载型钴锰复合氧化物Co-MnOx/ZSM-5催化剂,采用浸渍法将催化剂负载到堇青石蜂窝陶瓷上,在密封舱内进行催化降解甲醛研究,考察了室温下臭氧辅助催化降解室内低浓度甲醛的特性。同时,也探讨了催化剂制备工艺对催化剂活性的影响。实验结果表明:在500oC煅烧温度条件下制备的10% Co-MnOx/ZSM-5催化剂具有最高的催化活性。通过XRD、BET、TEM、XPS和TG-DSC等手段的表征结果表明,其高活性可能是主要来自于形成的CoMnO3晶相和Mn4 与Mn3 价态共存。

关 键 词:Co-MnOx/ZSM-5,催化,甲醛,臭氧辅助
收稿时间:2014/1/14 0:00:00
修稿时间:2014/1/27 0:00:00

Catalytic Oxidation of Low Concentration Formaldehyde with the Assist of Ozone over Supported Cobalt-manganese Composite Oxides
Institution:Shanghai Jiao Tong University,Shanghai Jiao Tong University,Shanghai Jiao Tong University,Shanghai Jiao Tong University,Shanghai Jiao Tong University
Abstract:A series of Co-MnOx/ZSM-5 catalysts were synthesized and coated on cordierite honeycomb ceramics by impregnation method. Their activities in catalytic oxidation of low concentration formaldehyde with the assist of ozone were evaluated in a seal measurement chamber. Moreover, the effect of catalyst preparation was discussed. In present research, the 10% Co-MnOx/ZSM-5 sample calcined at 500oC showed the best catalytic performance. The characterization of XRD, BET, TEM, XPS and TG-DSC evidenced that the formation of CoMnO3 and the coexistence of Mn4 /Mn3 was a possible determinant for formaldehyde removal.
Keywords:Co-MnOx/ZSM-5  catalytic  formaldehyde  ozone-assisted
本文献已被 CNKI 等数据库收录!
点击此处可从《分子催化》浏览原始摘要信息
点击此处可从《分子催化》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号